GM Tech-2 PRO Kit (CANdi & TIS)

The Tech-2 is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 to 2008
Features:
Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
Support for on-board diagnostics on all GM systems 1992 thru current year.
Removable hardware modules provide insurance against scan tool obsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional
The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
Vetronix Tech-2 Specifications
Dimensions
 12" X 6" X 2"
Microprocessor
 32 bit, 16 MHz
Memory
 32 MB flash type II PCMCIA. Type III slot available for future expansion.
Communications
 Integral RS232 communication port.
Screen
 3.8" X 2.8" backlit monochrome with full graphics capability: 320 X 240 pixels. Displays up to 9 vehicle parameters at once
GM Tech-2 Starter Kit with Candi Module & TIS Kit includes (All ORIGINAL and NEW!):
Tech-2 Flash Tester
32 MB PCMCIA Card with GM OE Applications
CAN diagnostic interface module(CANdi) and instruction sheet download ( 199.2 kb )
TIS2000 dongle to access SPS/Security features 
Data/Sensor/Trouble Code Manual
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/19 Adapter
NAO 12/19 Adapter
Battery Power Cable
Storage Case
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash's diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.

Interactive Whiteboard
Led light
Aluminium Powder

FLY200

FLY200 diagstic tool, FORD VCM IDS and MAZDA diagnosis
FLY200 supports 30 languages:
       1. Spanish 2. Slovenia 3. English 4. Greece 5. German 6. Danmark 7. Czechic 8. Chinese(Taiwan) 9. Chinese(China) 10. AmerEnglish 11. Vietnam 12. Turkey 13. Thailand 14. Swedish 15. Russian 16. Portuguese 17. Portuguese（Brazil） 18. Poland 19. Norwegian 20. Holand 21. Korea 22. Japanese 23. Italy 24. Indian 25. Hungary 26. French 27. French（Canada） 28. Finland 29. Spanish（Mexico） 30. Russian

 FLY200 functions include: 
    1.All ford vehicles(Include all ford functions of original VCM/IDS)
    2.All mazda vehicles(Include all mazda functions of original VCM/IDS)
    3.mazda Odometer Rewrite by OBD-16 no password
    4.Immobilize for ford and mazda by OBD-16 no password from 1992 to 2007

 Hardware and software requirements:
    1.PC or laptop with either Windows 2000 Professional (SP4 or later) or XP (SP1 or later);
    2.Hard disk drive with at least 400MB of free space
    3.CD-ROM drive (if a high-speed Internet connection is not available)
    4.Ethernet adapter required to connect PC to IDT
    5.Monitor capable of displaying in VGA mode or above (1024 x 768 recommended)

 Operation Notes:
    1.FLY200 can only work for WIN XP and WIN2000. It cannot work for VISTA

 FLY200 Kit Includes:
    1.FLY200 vehicle communication module
    2.OBD-16 Cable
    3.Ethernet link cable/RJ45 Tie-in
    4.One Box

HIM Interface Module for Honda

Description:
This interface module kit works with the OEM-Honda Diagnostic PC Software (HDS). It can diagnose all Honda and Acura vehicle systems on models from 1992 to year 2007.
It is the lastest version, supports CAN protocol.
Functions supported by Honda/Acura protocols:
Reading and decoding fault codes from control blocks' memory;
Deleting fault codes;
Displays system's current parameters in digital form;
Displays system's current parameters in graphical form;
Combined displaying of data;
Management of executive devices;
Logs keeping - writing and keeping of digital parameters in memory;
Special functions - changing of permissible settings of blocks, programming etc.
Functions supported by OBD-II protocols:
Mode $01 - Displays system's current parameters in digital form (up to 8 parameters at once);
Mode $02 - Displays parameters of "freeze" frame;
Mode $03 - Reading and decoding of fault codes from control block's memory;
Mode $04 - Deleting of fault codes (memory clearing);
Mode $05 - Displays results of oxygen sensors;
Mode $06 - Displays results of changeably controled systems and components;
Mode $07 - Displays results of constantly controled systems and components;
Mode $08 - Management of executive devices;
Mode $09 - Displays car's identification info.
Hardware and software requirements:
PC or laptop with either Windows 2000 Professional (SP4 or later) or XP (SP1 or later)
Hard disk drive with at least 400MB of free space
CD-ROM drive (if a high-speed Internet connection is not available)
RS232 port required to connect PC to HIM (PC version software only)
Monitor capable of displaying in VGA mode or above (1024 x 768 recommended)
Internet connection (high-speed connection recommended)
Honda Diagnostic System kit includes:
1 x HIM with OBD II Cable
1 x DVD1 x 3 Pin Cable
1 x AC Power Supplier 
1 x RS232 Cable
2 x Selftest Adapter
1 x Storage Case